Gutter

Greenhouse - NN9.6

Gutter:

  • Gutter height: 4.0 m (cost 0.0)
  • Made from galvanized steel sheet Z.275 1.2mm in thickness and 265mm in diameter
  • Slope of gutter is 1.5% from center of gutter to 2 direction in longitude of greenhouse
  • To maximum and synchronize longevity of frame of greenhouse and gutter. Gutter made of no spangle Z.275, 1.2mm in thickness

Gutter drop outlet:

  • Made from galvanized steel sheet Z.275 1.2mm in thickness and 168mm in diameter. Included 2 PVC drainage pipes, diameter 168mm are connected to gutter to the ground.
  • To divert water outside of the greenhouse and maximize water flow drainage from gutters, 2 elbows D. 168 mm are used at the end of downspouts (near the ground) and 45 degree leaning to the ground

 

Greenhouse - NN12.8

Eaves gutter:

·        Gutter height: 5.0 m (cost 0.0), the height of eaves: 175mm, width of eaves: 235mm.

·        Made of galvanized steel sheet (1.5mm).

·        They are designed to follow 2 pillars of the greenhouse.

Gutter drop outlet:

·        Made from galvanized steel sheet Z.275 1.5mm in thickness and 168mm in diameter. 2 PVC drainage pipes, Diameter 168mm are connected to gutter to the ground.

 

·        To divert water outside of the greenhouse and maximize water flow drainage from gutters, 2 elbows D. 168 mm are used at the end of downspouts (near the ground).

XEM THÊM

    Nha Nguyen's zigzag straps

    High quality synchronized accessories

    Support frame

    

    

    

    Nha Nguyen's sheet fastening clips